RC Cars

5000mAh 7.4v 2-Cell 25C LiPo Battery

Charger, EZ-Peak® Plus, 4 amp, NiMH/LiPo with iD® Auto Battery Identification

Glow plug, super-duty (long-medium)/gasket

PN RACING AAA Ni-MH 800HV 750mAh

PN Racing RCP Slick Front TIRES Firm (1 pair)

Body clips, heavy duty (12)

Charger, EZ-Peak® Dual, 100W, NiMH/LiPo with iD® Auto Battery Identification

Tamiya Paint PS-1 White

Gens ace 5000mAh 7.4V 50c 2S1P Hardcase LiPo Battery Deans plug

Battery, Series 1 Power Cell, 1200mAh (NiMH, 6-C flat, 7.2V, 2/3A)

Ball bearings, blue rubber sealed (5x11x4mm) (2)

Suspension screw pin set, steel (hex drive) (requires part #2640 for a complete suspension pin set) (Rustler®, Stampede®, Bandit)

Wheel hubs, hex (2)/ stub axle pins (2)

PN Racing PNWC 70 Turn Ball Bearing Motor

Driveshaft Rear X-HD L/R

Spur gear, 86-tooth (48-pitch) (for models with Torque-Control slipper clutch)

Traxxas Slash RTR 2WD (Red)

Traxxas Slash RTR 2WD (Blue)

AC to DC converter, 40W

Big Bore shocks (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts and springs) (front & rear) (4)

Futaba R203GF 2.4GHz S-FHSS 3-Channel Receiver

Spur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch)

Morgan Sidewinder 20% Backyard Basher 1 Gallon

Stub axle carriers (2)

PN Racing Mini-Z KS Compound RCP Low Profile Slick 8.5mm Tire FIRM (2pc)

5800Mah 7.4v 2-Cell 25C LiPo Battery

FUTABA 4PM 2.4GHz 4-Channel T-FHSS

T-Plug Dean Connectors (5 Pairs)

Steering blocks, left & right (2) (requires 5x11x4mm bearings)

Body clips, heavy duty (black) (12)

Gens ace 5000mAh 11.1V 50c 3S1P Hardcase LiPo Battery Deans plug

Spur gear, 90-tooth (48-pitch) (for models with Torque-Control slipper clutch)

PTFE-coated washers, 5x8x0.5mm (20) (use with ball bearings)

Tool set with pouch (includes 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4mm drivers/ 4mm, 5mm, 5.5mm, 7mm and 8mm nut drivers/ 2mm, 4mm, and 5mm slotted screwdrivers/ #00 Phillips, #0 Phillips, and #1 Phillips screwdrivers/ 4mm and 8mm wrench/ driver handle

Spring retainers, upper & lower (2)/ piston head set (2-hole (2)/ 3-hole (2))